Glossary entry (derived from question below)
English term or phrase:
Left Synchronous
French translation:
Synchrone gauche
Added to glossary by
Jeremy BOISSEL
May 13, 2011 13:49
13 yrs ago
English term
Left Synchronous
English to French
Tech/Engineering
Computers: Systems, Networks
Bonjour,
Avez-vous une idée de ce que signifie Left Synchronous ?
"RAID 6 Reed-Solomon (Left Synchronous (Standard)) Preset"
Merci
Avez-vous une idée de ce que signifie Left Synchronous ?
"RAID 6 Reed-Solomon (Left Synchronous (Standard)) Preset"
Merci
Proposed translations
(French)
| 4 +2 | Synchrone gauche |
Alain Boulé
|
Proposed translations
+2
19 mins
Alain Boulé
Native in French
Specializes in field
Technical translation by an engineer
Native in: French
Works in: English to French, German to French
Related KudoZ points
:
86
Selected
Synchrone gauche
Il s'agit de l'algorithme de placement des segments sur les disques d'un array RAID.
RAID-5 Parity Rotation
RAID-5 under any operating system can use one of four algorithms for the placement of segments among the disks in the array. -Keep in mind in your troubleshooting that there may be an offset throwing everything off. Find the partition table or OS identifier and us this as your definite sector 0. In a RAID 5 there should be two drives with a partition table. One is the first drive in that array and one is the last drive in the array.
Right Synchronous
Left Synchronous,
Left Asynchronous
Right Asynchronous
Left Synchronous
In this layout, the segments are numbered sequentially, starting with the first drive in the stripe after the parity. The segments wrap. The parity drive starts at the left-most drive, and moves right one drive per stripe. This is the default RAID-5 segment layout under Linux.
RAID-5 Parity Rotation
RAID-5 under any operating system can use one of four algorithms for the placement of segments among the disks in the array. -Keep in mind in your troubleshooting that there may be an offset throwing everything off. Find the partition table or OS identifier and us this as your definite sector 0. In a RAID 5 there should be two drives with a partition table. One is the first drive in that array and one is the last drive in the array.
Right Synchronous
Left Synchronous,
Left Asynchronous
Right Asynchronous
Left Synchronous
In this layout, the segments are numbered sequentially, starting with the first drive in the stripe after the parity. The segments wrap. The parity drive starts at the left-most drive, and moves right one drive per stripe. This is the default RAID-5 segment layout under Linux.
4 KudoZ points awarded for this answer.
Comment: "Merci Alain !"
Something went wrong...